Fedora iTOps Tube

Thursday, April 26, 2012

Installing F16 to SSD, (re)formatting parameter issues

Hi,



I'm having trouble to install F16 to an SSD. My main goal is to have the ext4 filesystem for the / partition to be created with some specific parameters that (should) help to align filesystem specific structures better to the erase block sizes of my SSD.



My first attempt was to partition the SSD myself and create an ext4 filesystem as intended for the / filesystem: (It's the -E parameter that's supposed to be important if /dev/sda2 is properly aligned in the partitioning too)



mkfs.ext4 -v -b 4096 -m 2 -E stride=128,stripe-width=128,resize=70G /dev/sda2



after doing this...



when I go through the livecd "installation to harddisk" procedure, I can not get F16 to install to this partition, it insists that it want to re-format the partition I chose (/dev/sda2) to use as /



When i give in and let the installation tool reformat (to ext4) the partition I can not find any option to add my (-E) parameters to the issued mkfs command that is run.



Is there a way to install to a preformatted filesystem, or a way to add parameters to the mkfs that is done from the installation tool GUI?




Epson V350 scanner not detected by iscan etc

Hi

I had problems with this on FC14, but it was a filed bug.

I've loaded the iscan data and the iscan app from the Ayasi site

and the device is not detected by any of the scanning apps.



lsusb shows the device

iscan-2.26.0-3ltd7.x86_64 is loaded, the later version 2.28 will not install,

and the tarball fails to build with error:C++ compiler csnnot create executables..



I can't believe a bug filed on FC14 is still open , has anyone got one of these Epson scanner to function with FC16 ???





TIA

Richard



---------- Post added at 03:28 PM ---------- Previous post was at 03:27 PM ----------



that should read "uppercase c ++" not an emoticon



sry




Epson V350 scanner not detected by iscan etc

Hi

I had problems with this on FC14, but it was a filed bug.

I've loaded the iscan data and the iscan app from the Ayasi site

and the device is not detected by any of the scanning apps.



lsusb shows the device

iscan-2.26.0-3ltd7.x86_64 is loaded, the later version 2.28 will not install,

and the tarball fails to build with error:C++ compiler csnnot create executables..



I can't believe a bug filed on FC14 is still open , has anyone got one of these Epson scanner to function with FC16 ???





TIA

Richard



---------- Post added at 03:28 PM ---------- Previous post was at 03:27 PM ----------



that should read "uppercase c ++" not an emoticon



sry




[SOLVED] retrospect client installation

I was having problems installing Dantz retrospect backup client software, so I am recording the solution for posterity. retrospect is an i386 app, so it needs 32bit libgcc installed if you are on a 64bit system.



PROBLEM:




Code:


# rpm -ihv linux_client-7_7_100.rpm

Preparing...                ########################################### [100%]

  1:retroclient            ########################################### [100%]



Installing Retrospect Client...

...



Enter first access password:

Retype the first access password:

Starting client as daemon...



Installation was successful, but Retrospect Client could not be started.

 If this is an upgrade, please wait 5 minutes, then start the client manually

 by running $ /usr/local/dantz/client/rcl start



# cat /var/log/messages | grep retroclient

Apr 25 09:46:19 psy86 retroclient: libgcc_s.so.1 must be installed for pthread_cancel to work


SOLUTION:


Code:


# rpm -e retroclient

LSB Version:        :core-4.0-amd64:core-4.0-noarch

# yum install libgcc.i686

Loaded plugins: langpacks, presto, refresh-packagekit

Resolving Dependencies

...

Complete!

# rpm -ihv linux_client-7_7_100.rpm

Preparing...                ########################################### [100%]

  1:retroclient            ########################################### [100%]



Installing Retrospect Client...

...

Retrospect Client started successfully!

# /usr/local/dantz/client/retrocpl

Server "psy86.psy.utexas.edu":

        Version 7.7.100

        back up according to normal schedule

        currently on

        readonly is off

        exclude is off

        0 connections, 0 authenticated

# /sbin/chkconfig --add /etc/init.d/rcl






[SOLVED] retrospect client installation

I was having problems installing Dantz retrospect backup client software, so I am recording the solution for posterity. retrospect is an i386 app, so it needs 32bit libgcc installed if you are on a 64bit system.



PROBLEM:




Code:


# rpm -ihv linux_client-7_7_100.rpm

Preparing...                ########################################### [100%]

  1:retroclient            ########################################### [100%]



Installing Retrospect Client...

...



Enter first access password:

Retype the first access password:

Starting client as daemon...



Installation was successful, but Retrospect Client could not be started.

 If this is an upgrade, please wait 5 minutes, then start the client manually

 by running $ /usr/local/dantz/client/rcl start



# cat /var/log/messages | grep retroclient

Apr 25 09:46:19 psy86 retroclient: libgcc_s.so.1 must be installed for pthread_cancel to work


SOLUTION:


Code:


# rpm -e retroclient

LSB Version:        :core-4.0-amd64:core-4.0-noarch

# yum install libgcc.i686

Loaded plugins: langpacks, presto, refresh-packagekit

Resolving Dependencies

...

Complete!

# rpm -ihv linux_client-7_7_100.rpm

Preparing...                ########################################### [100%]

  1:retroclient            ########################################### [100%]



Installing Retrospect Client...

...

Retrospect Client started successfully!

# /usr/local/dantz/client/retrocpl

Server "psy86.psy.utexas.edu":

        Version 7.7.100

        back up according to normal schedule

        currently on

        readonly is off

        exclude is off

        0 connections, 0 authenticated

# /sbin/chkconfig --add /etc/init.d/rcl






lowmem_reserve[] 0 0 0 0 issue

Hi;



Not sure if this is the right forum to post a fc14 Kernel related question.? But below is the issue I see on our system:



Configuration:

Kernnel Liniux 2.6.35.6-45.fc14.i686

GNOME 2.32.0



We have total of 2GB RAM

This is 8 CPU IBM server with 2 PCI express slots.

IN both PCI express slot we have 10G dual port Brocard 1040 cards



When system boots it shows 6 ports, 2 on Mother board and 4 on the PCI express (10G)



System is used for bridge control (brctl and tc) like a man in moddle configuration.



Issue seen is lowmem_reserve[] 0 0 0 0 when we run traffic we start to see:



Apr 25 07:51:16 impair2 kernel: [ 148.413982] lowmem_reserve[]: 0 0 0 0

Apr 25 07:51:16 impair2 kernel: [ 148.413985] DMA: 5*4kB 3*8kB 4*16kB 0*32kB 2*64kB 3*128kB 3*256kB 0*512kB 2*1024kB 0*2048kB 0*4096kB = 3436kB

Apr 25 07:51:16 impair2 kernel: [ 148.413996] Normal: 0*4kB 0*8kB 1*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 1*1024kB 0*2048kB 0*4096kB = 1392kB

Apr 25 07:51:16 impair2 kernel: [ 148.414005] HighMem: 256*4kB 239*8kB 153*16kB 130*32kB 87*64kB 30*128kB 21*256kB 6*512kB 5*1024kB 4*2048kB 234*4096kB = 999176kB

Apr 25 07:51:16 impair2 kernel: [ 148.414016] 37831 total pagecache pages

Apr 25 07:51:16 impair2 kernel: [ 148.414018] 0 pages in swap cache

Apr 25 07:51:16 impair2 kernel: [ 148.414020] Swap cache stats: add 0, delete 0, find 0/0

Apr 25 07:51:16 impair2 kernel: [ 148.414022] Free swap = 4128764kB

Apr 25 07:51:16 impair2 kernel: [ 148.414024] Total swap = 4128764kB

Apr 25 07:51:16 impair2 kernel: [ 148.422699] 522239 pages RAM

Apr 25 07:51:16 impair2 kernel: [ 148.422701] 296962 pages HighMem

Apr 25 07:51:16 impair2 kernel: [ 148.422703] 9684 pages reserved

Apr 25 07:51:16 impair2 kernel: [ 148.422704] 33467 pages shared

Apr 25 07:51:16 impair2 kernel: [ 148.422706] 247699 pages non-shared

Apr 25 07:51:16 impair2 kernel: [ 148.422717] swapper: page allocation failure. order:0, mode:0x4020

Apr 25 07:51:16 impair2 kernel: [ 148.422721] Pid: 0, comm: swapper Not tainted 2.6.35.6-45.fc14.i686 #1

Apr 25 07:51:16 impair2 kernel: [ 148.422724] Call Trace:

Apr 25 07:51:16 impair2 kernel: [ 148.422731] [<c07a56b9>] ? printk+0x25/0x2c

Apr 25 07:51:16 impair2 kernel: [ 148.422738] [<c04ad634>] __alloc_pages_nodemask+0x552/0x5ad

Apr 25 07:51:16 impair2 kernel: [ 148.422743] [<c04cf417>] alloc_slab_page+0x1a/0x20

Apr 25 07:51:16 impair2 kernel: [ 148.422747] [<c04d0402>] __slab_alloc+0x13c/0x3a8

Apr 25 07:51:16 impair2 kernel: [ 148.422752] [<c04d1902>] __kmalloc_track_caller+0xb8/0x102

Apr 25 07:51:16 impair2 kernel: [ 148.422765] [<f99cc7d3>] ? bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422777] [<f99cc7d3>] ? bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422783] [<c07106fd>] __alloc_skb+0x59/0x100

Apr 25 07:51:16 impair2 kernel: [ 148.422794] [<f99cc7d3>] bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422807] [<f99cd1da>] bnad_cb_rx_post+0xea/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422824] [<f99ee888>] bna_rx_sm_stopped+0x338/0x8c0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422830] [<c043385c>] ? default_wake_function+0x10/0x12

Apr 25 07:51:16 impair2 kernel: [ 148.422848] [<f99f0ba8>] bna_rx_mod_start+0x68/0xe0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422863] [<f99e13fa>] ? bna_port_sm_started_entry+0x6a/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422879] [<f99e1c4f>] bna_port_sm_mtu_cfg_wait+0x17f/0x2a0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422895] [<f99e0b45>] bna_fw_cb_mtu_set+0x25/0x30 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422911] [<f99e69a8>] bna_ll_isr+0xf8/0x480 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422917] [<c05af027>] ? cpumask_next_and+0x23/0x2f

Apr 25 07:51:16 impair2 kernel: [ 148.422922] [<c040801b>] ? native_sched_clock+0x4c/0x52

Apr 25 07:51:16 impair2 kernel: [ 148.422926] [<c040801b>] ? native_sched_clock+0x4c/0x52

Apr 25 07:51:16 impair2 kernel: [ 148.422930] [<c040802a>] ? sched_clock+0x9/0xd

Apr 25 07:51:16 impair2 kernel: [ 148.422935] [<c0452773>] ? sched_clock_cpu+0x42/0x133

Apr 25 07:51:16 impair2 kernel: [ 148.422939] [<c044fb96>] ? run_posix_cpu_timers+0x1e/0x55d

Apr 25 07:51:16 impair2 kernel: [ 148.422943] [<c045288b>] ? cpu_clock+0x27/0x30

Apr 25 07:51:16 impair2 kernel: [ 148.422947] [<c0450c61>] ? hrtimer_forward+0x114/0x128

Apr 25 07:51:16 impair2 kernel: [ 148.422950] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.422956] [<c0419cee>] ? apic_write+0x14/0x16

Apr 25 07:51:16 impair2 kernel: [ 148.422959] [<c0419e3a>] ? lapic_next_event+0x14/0x18

Apr 25 07:51:16 impair2 kernel: [ 148.422964] [<c045898d>] ? clockevents_program_event+0xc7/0xd9

Apr 25 07:51:16 impair2 kernel: [ 148.422967] [<c04551dd>] ? ktime_get+0x5d/0x8d

Apr 25 07:51:16 impair2 kernel: [ 148.422971] [<c0459809>] ? tick_dev_program_event+0x29/0x109

Apr 25 07:51:16 impair2 kernel: [ 148.422988] [<f99ffc05>] bfa_ioc_mbox_isr+0x45/0x100 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422992] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.423008] [<f99e296a>] bna_mbox_handler+0x2a/0x40 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.423019] [<f99cdafc>] bnad_msix_mbox_handler+0x5c/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.423023] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.423028] [<c04831f3>] handle_IRQ_event+0x4e/0xf7

Apr 25 07:51:16 impair2 kernel: [ 148.423032] [<c0484e8c>] handle_edge_irq+0xbf/0x101

Apr 25 07:51:16 impair2 kernel: [ 148.423037] [<c0404e54>] handle_irq+0x40/0x4c

Apr 25 07:51:16 impair2 kernel: [ 148.423040] [<c0404bd5>] do_IRQ+0x46/0x91

Apr 25 07:51:16 impair2 kernel: [ 148.423044] [<c04038f0>] common_interrupt+0x30/0x38

Apr 25 07:51:16 impair2 kernel: [ 148.423049] [<c04300e0>] ? __sched_setscheduler+0x266/0x2ce

Apr 25 07:51:16 impair2 kernel: [ 148.423053] [<c05ef074>] ? intel_idle+0xf2/0x119

Apr 25 07:51:16 impair2 kernel: [ 148.423059] [<c06f3d88>] cpuidle_idle_call+0x6e/0xc1

Apr 25 07:51:16 impair2 kernel: [ 148.423062] [<c040214c>] cpu_idle+0x8e/0xaf

Apr 25 07:51:16 impair2 kernel: [ 148.423066] [<c0793575>] rest_init+0x71/0x73

Apr 25 07:51:16 impair2 kernel: [ 148.423072] [<c0a1d7d7>] start_kernel+0x34a/0x34f

Apr 25 07:51:16 impair2 kernel: [ 148.423076] [<c0a1d0c9>] i

Apr 25 07:51:16 impair2 kernel: [ 148.423150] active_anon:10849 inactive_anon:125 isolated_anon:0

Apr 25 07:51:16 impair2 kernel: [ 148.423151] active_file:8069 inactive_file:29583 isolated_file:0

Apr 25 07:51:16 impair2 kernel: [ 148.423153] unevictable:0 dirty:7 writeback:0 unstable:0

Apr 25 07:51:16 impair2 kernel: [ 148.423154] free:251038 slab_reclaimable:2196 slab_unreclaimable:29932

Apr 25 07:51:16 impair2 kernel: [ 148.423155] mapped:7175 shmem:178 pagetables:543 bounce:0

Apr 25 07:51:16 impair2 kernel: [ 148.423164] DMA free:3436kB min:64kB low:80kB high:96kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15832kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:88kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes

Apr 25 07:51:16 impair2 kernel: [ 148.423171] lowmem_reserve[]: 0 857 2006 2006



How can is work around this issue? Or is there a bug fix for this issue?



Appreciate your help;



Thanks,

Bhupesh Desai




lowmem_reserve[] 0 0 0 0 issue

Hi;



Not sure if this is the right forum to post a fc14 Kernel related question.? But below is the issue I see on our system:



Configuration:

Kernnel Liniux 2.6.35.6-45.fc14.i686

GNOME 2.32.0



We have total of 2GB RAM

This is 8 CPU IBM server with 2 PCI express slots.

IN both PCI express slot we have 10G dual port Brocard 1040 cards



When system boots it shows 6 ports, 2 on Mother board and 4 on the PCI express (10G)



System is used for bridge control (brctl and tc) like a man in moddle configuration.



Issue seen is lowmem_reserve[] 0 0 0 0 when we run traffic we start to see:



Apr 25 07:51:16 impair2 kernel: [ 148.413982] lowmem_reserve[]: 0 0 0 0

Apr 25 07:51:16 impair2 kernel: [ 148.413985] DMA: 5*4kB 3*8kB 4*16kB 0*32kB 2*64kB 3*128kB 3*256kB 0*512kB 2*1024kB 0*2048kB 0*4096kB = 3436kB

Apr 25 07:51:16 impair2 kernel: [ 148.413996] Normal: 0*4kB 0*8kB 1*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 1*1024kB 0*2048kB 0*4096kB = 1392kB

Apr 25 07:51:16 impair2 kernel: [ 148.414005] HighMem: 256*4kB 239*8kB 153*16kB 130*32kB 87*64kB 30*128kB 21*256kB 6*512kB 5*1024kB 4*2048kB 234*4096kB = 999176kB

Apr 25 07:51:16 impair2 kernel: [ 148.414016] 37831 total pagecache pages

Apr 25 07:51:16 impair2 kernel: [ 148.414018] 0 pages in swap cache

Apr 25 07:51:16 impair2 kernel: [ 148.414020] Swap cache stats: add 0, delete 0, find 0/0

Apr 25 07:51:16 impair2 kernel: [ 148.414022] Free swap = 4128764kB

Apr 25 07:51:16 impair2 kernel: [ 148.414024] Total swap = 4128764kB

Apr 25 07:51:16 impair2 kernel: [ 148.422699] 522239 pages RAM

Apr 25 07:51:16 impair2 kernel: [ 148.422701] 296962 pages HighMem

Apr 25 07:51:16 impair2 kernel: [ 148.422703] 9684 pages reserved

Apr 25 07:51:16 impair2 kernel: [ 148.422704] 33467 pages shared

Apr 25 07:51:16 impair2 kernel: [ 148.422706] 247699 pages non-shared

Apr 25 07:51:16 impair2 kernel: [ 148.422717] swapper: page allocation failure. order:0, mode:0x4020

Apr 25 07:51:16 impair2 kernel: [ 148.422721] Pid: 0, comm: swapper Not tainted 2.6.35.6-45.fc14.i686 #1

Apr 25 07:51:16 impair2 kernel: [ 148.422724] Call Trace:

Apr 25 07:51:16 impair2 kernel: [ 148.422731] [<c07a56b9>] ? printk+0x25/0x2c

Apr 25 07:51:16 impair2 kernel: [ 148.422738] [<c04ad634>] __alloc_pages_nodemask+0x552/0x5ad

Apr 25 07:51:16 impair2 kernel: [ 148.422743] [<c04cf417>] alloc_slab_page+0x1a/0x20

Apr 25 07:51:16 impair2 kernel: [ 148.422747] [<c04d0402>] __slab_alloc+0x13c/0x3a8

Apr 25 07:51:16 impair2 kernel: [ 148.422752] [<c04d1902>] __kmalloc_track_caller+0xb8/0x102

Apr 25 07:51:16 impair2 kernel: [ 148.422765] [<f99cc7d3>] ? bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422777] [<f99cc7d3>] ? bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422783] [<c07106fd>] __alloc_skb+0x59/0x100

Apr 25 07:51:16 impair2 kernel: [ 148.422794] [<f99cc7d3>] bnad_alloc_n_post_rxbufs+0xd3/0x240 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422807] [<f99cd1da>] bnad_cb_rx_post+0xea/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422824] [<f99ee888>] bna_rx_sm_stopped+0x338/0x8c0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422830] [<c043385c>] ? default_wake_function+0x10/0x12

Apr 25 07:51:16 impair2 kernel: [ 148.422848] [<f99f0ba8>] bna_rx_mod_start+0x68/0xe0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422863] [<f99e13fa>] ? bna_port_sm_started_entry+0x6a/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422879] [<f99e1c4f>] bna_port_sm_mtu_cfg_wait+0x17f/0x2a0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422895] [<f99e0b45>] bna_fw_cb_mtu_set+0x25/0x30 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422911] [<f99e69a8>] bna_ll_isr+0xf8/0x480 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422917] [<c05af027>] ? cpumask_next_and+0x23/0x2f

Apr 25 07:51:16 impair2 kernel: [ 148.422922] [<c040801b>] ? native_sched_clock+0x4c/0x52

Apr 25 07:51:16 impair2 kernel: [ 148.422926] [<c040801b>] ? native_sched_clock+0x4c/0x52

Apr 25 07:51:16 impair2 kernel: [ 148.422930] [<c040802a>] ? sched_clock+0x9/0xd

Apr 25 07:51:16 impair2 kernel: [ 148.422935] [<c0452773>] ? sched_clock_cpu+0x42/0x133

Apr 25 07:51:16 impair2 kernel: [ 148.422939] [<c044fb96>] ? run_posix_cpu_timers+0x1e/0x55d

Apr 25 07:51:16 impair2 kernel: [ 148.422943] [<c045288b>] ? cpu_clock+0x27/0x30

Apr 25 07:51:16 impair2 kernel: [ 148.422947] [<c0450c61>] ? hrtimer_forward+0x114/0x128

Apr 25 07:51:16 impair2 kernel: [ 148.422950] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.422956] [<c0419cee>] ? apic_write+0x14/0x16

Apr 25 07:51:16 impair2 kernel: [ 148.422959] [<c0419e3a>] ? lapic_next_event+0x14/0x18

Apr 25 07:51:16 impair2 kernel: [ 148.422964] [<c045898d>] ? clockevents_program_event+0xc7/0xd9

Apr 25 07:51:16 impair2 kernel: [ 148.422967] [<c04551dd>] ? ktime_get+0x5d/0x8d

Apr 25 07:51:16 impair2 kernel: [ 148.422971] [<c0459809>] ? tick_dev_program_event+0x29/0x109

Apr 25 07:51:16 impair2 kernel: [ 148.422988] [<f99ffc05>] bfa_ioc_mbox_isr+0x45/0x100 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.422992] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.423008] [<f99e296a>] bna_mbox_handler+0x2a/0x40 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.423019] [<f99cdafc>] bnad_msix_mbox_handler+0x5c/0xf0 [bna]

Apr 25 07:51:16 impair2 kernel: [ 148.423023] [<c0407d24>] ? read_tsc+0xa/0x28

Apr 25 07:51:16 impair2 kernel: [ 148.423028] [<c04831f3>] handle_IRQ_event+0x4e/0xf7

Apr 25 07:51:16 impair2 kernel: [ 148.423032] [<c0484e8c>] handle_edge_irq+0xbf/0x101

Apr 25 07:51:16 impair2 kernel: [ 148.423037] [<c0404e54>] handle_irq+0x40/0x4c

Apr 25 07:51:16 impair2 kernel: [ 148.423040] [<c0404bd5>] do_IRQ+0x46/0x91

Apr 25 07:51:16 impair2 kernel: [ 148.423044] [<c04038f0>] common_interrupt+0x30/0x38

Apr 25 07:51:16 impair2 kernel: [ 148.423049] [<c04300e0>] ? __sched_setscheduler+0x266/0x2ce

Apr 25 07:51:16 impair2 kernel: [ 148.423053] [<c05ef074>] ? intel_idle+0xf2/0x119

Apr 25 07:51:16 impair2 kernel: [ 148.423059] [<c06f3d88>] cpuidle_idle_call+0x6e/0xc1

Apr 25 07:51:16 impair2 kernel: [ 148.423062] [<c040214c>] cpu_idle+0x8e/0xaf

Apr 25 07:51:16 impair2 kernel: [ 148.423066] [<c0793575>] rest_init+0x71/0x73

Apr 25 07:51:16 impair2 kernel: [ 148.423072] [<c0a1d7d7>] start_kernel+0x34a/0x34f

Apr 25 07:51:16 impair2 kernel: [ 148.423076] [<c0a1d0c9>] i

Apr 25 07:51:16 impair2 kernel: [ 148.423150] active_anon:10849 inactive_anon:125 isolated_anon:0

Apr 25 07:51:16 impair2 kernel: [ 148.423151] active_file:8069 inactive_file:29583 isolated_file:0

Apr 25 07:51:16 impair2 kernel: [ 148.423153] unevictable:0 dirty:7 writeback:0 unstable:0

Apr 25 07:51:16 impair2 kernel: [ 148.423154] free:251038 slab_reclaimable:2196 slab_unreclaimable:29932

Apr 25 07:51:16 impair2 kernel: [ 148.423155] mapped:7175 shmem:178 pagetables:543 bounce:0

Apr 25 07:51:16 impair2 kernel: [ 148.423164] DMA free:3436kB min:64kB low:80kB high:96kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15832kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:88kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes

Apr 25 07:51:16 impair2 kernel: [ 148.423171] lowmem_reserve[]: 0 857 2006 2006



How can is work around this issue? Or is there a bug fix for this issue?



Appreciate your help;



Thanks,

Bhupesh Desai




Intellinet 150N wireless Mini USB adapter not working

I have fedora 14 (i dont have 15 and 16 is too resource intensive) installed on a 4gb flashdrive. It has an issue. My pc has a Intellinet usb wireless adapter, and fedora is either not detecting it, or simply not having the right drivers for it. I have looked around on the internet and came up with this, but it is for ubuntu and i am not sure if it would work, or if it would just screw up my set up.



Can anyone tell me if the bash code is safe, or if there is a better solution?




Intellinet 150N wireless Mini USB adapter not working

I have fedora 14 (i dont have 15 and 16 is too resource intensive) installed on a 4gb flashdrive. It has an issue. My pc has a Intellinet usb wireless adapter, and fedora is either not detecting it, or simply not having the right drivers for it. I have looked around on the internet and came up with this, but it is for ubuntu and i am not sure if it would work, or if it would just screw up my set up.



Can anyone tell me if the bash code is safe, or if there is a better solution?




Google CR-48/WiFi very slow

The wifi card in a CR-48 is the Atheros AR928X, or so lspci tells me.



Pulling up pages, it is much slower than my Windows machine. In pulling up fedoraforum.org, there was a fifteen second difference. Sometimes, a page won't come up at all unless I stop the load and refresh.



Is there anything I can do to optimize?




[SOLVED] Thumb drives and TRASH

I am having an odd issue with my thumb drives. I can add files to them, but cannot delete files from the thumb drives.



As a (non-administrator) user, when I select to delete a file on the thumb drive, it moves the file to a hidden trash folder (.Trash-1000) on the thumb drive. So the end result is the file disappears but still is occupying space on the thumb drive.



As root, I can delete the file (or directory), but then the thumb drives are endlessly busy and umount is not clean.



Anyone else seeing this odd behavior in F16 Xfce?




Google CR-48/WiFi very slow

The wifi card in a CR-48 is the Atheros AR928X, or so lspci tells me.



Pulling up pages, it is much slower than my Windows machine. In pulling up fedoraforum.org, there was a fifteen second difference. Sometimes, a page won't come up at all unless I stop the load and refresh.



Is there anything I can do to optimize?




Game Maker

Hello. I would like to be able to make my own games in Fedora 16. I used GameMaker when I used Windows 7. Is there any similar program for Fedora 16?




Question for those running open-source video drivers

Especially those running mobile computers, especially laptops/netbooks and the like.



How do you find the open-source drivers of your chip vs the proprietery blob? Part of the reason I ask is i've had two portable computers, a Sony Vaio and now this ASUS EEEPC netbook. Both machines run an ATI GPU, both were Radeon HD but different models.



My experience, especially trying modern desktops like Unity and Gnome-Shell is that with the open source drivers, desktop usability, as in speed and responsiveness, is fine. With the proprietery drivers, things get noticably less smooth and laggy.



HOWEVER, the open source drivers whilst providing a smoother desktop experience, did not seem to be able to run HD videos as efficiently (nor any 3D games obviously) and ran both my machines easily 10-15c hotter :dis: Of course this in turn can give worse battery life, although using something like PowerPlay Switcher and turning on a power saving power_profile can help with that a fair bit. But the temperatures difference and the fact the machines are noticably louder as they try to cope is a fair turn off.



So this is a pretty small sample experience to go on, but it seems to me that new users will be better off in terms of desktop smoothness when using the often default "open-source" drivers but the machines might suffer heat and battery problems, which is not great but especially with ATI, the proprietery blobs can be less than ideal. I'm not too sure on how NVIDIA are, but I think Nouveau are meant to be quite decent, but I don't know how the power management is.



With my current netbook, as the heat and loudness of the fans annoyed me and I wanted to run HD videos smoothly, I decided to run with the proprietery Catalyst driver but use a very lightweight WM like Window Maker, where performance is so good it doesnt matter what driver I'm running :D and my HD videos and temps are fine.

My thinking is that a desktop computer might not be as noticable in terms of heat and the open source drivers are probably fine for general desktop use, but I don't have a lot of experience.



What do YOU think?




Good newbie guide to Fedora firewall

Im trying to find some type of guide for making a simple good set of rules for a stand alone machine that is online with a reuter supplied by an isp provider??




Issues connecting to smb NAS

Heyas



After i had refused to try further by experiments, how to connect to my iomega network storage, i browsed for a solution.

2 of those many pieces were:

http://dreambox.funfiles.cc/index.ph...&postID=146167

http://www.cyberciti.biz/tips/how-to...der-linux.html



Both of them refer to use a mount command similar to:


Code:


# mount -t smbfs -o username=usr,password=pw //ntserver/download /mnt/ntserver

However, i run this:


Code:


for NETFS in cifs nfs smb smbfs;do

    sudo mount -t $NETFS -o rw,soft,username=usr,password=pw  //192.168.10.110/Shares /mnt/nas && break || dmesg|tail

done

ping -c 1 192.168.10.110


And get:


Code:


mount: //192.168.10.110/Share is not a valid block device

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: wrong fs type, bad option, bad superblock on //192.168.10.110/Share,

      missing codepage or helper program, or other error

      (for several filesystems (e.g. nfs, cifs) you might

      need a /sbin/mount.<type> helper program)

      In some cases useful info is found in syslog - try

      dmesg | tail  or so



[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: unknown filesystem type 'smb'

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: unknown filesystem type 'smbfs'

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

PING 192.168.10.110 (192.168.10.110) 56(84) bytes of data.

64 bytes from 192.168.10.110: icmp_req=1 ttl=64 time=1.18 ms



--- 192.168.10.110 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 1.182/1.182/1.182/0.000 ms


After the installation of:


Code:


sudo yum install cifs-utils, samba4, fuse-smb, cntlm

The errors look a bit better, but still not very promising for a new bee in networks...


Code:


mount: unknown filesystem type 'smbfs'

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

[ 2526.971623] CIFS VFS: cifs_mount failed w/return code = -6

[ 2533.246870] CIFS VFS: cifs_mount failed w/return code = -6

[ 2545.667813] CIFS VFS: cifs_mount failed w/return code = -6

[ 2620.529803] CIFS VFS: cifs_mount failed w/return code = -6

[ 2620.590951] CIFS VFS: cifs_mount failed w/return code = -6


Any help or hint is very welcome.

Thanks in advance.




virtual box networking

i need to connect a windows XP as a guest(in virtual box) with fedora 16 as a host so that wired connection icon(in top bar)shows that connection is established.

how could i do this?

in windows xp the icon of network connection is lights up,whereas in fedora it did not!!!

in fact i want to establish such connection without any physicall connection,but in a virtual connection.




Question for those running open-source video drivers

Especially those running mobile computers, especially laptops/netbooks and the like.



How do you find the open-source drivers of your chip vs the proprietery blob? Part of the reason I ask is i've had two portable computers, a Sony Vaio and now this ASUS EEEPC netbook. Both machines run an ATI GPU, both were Radeon HD but different models.



My experience, especially trying modern desktops like Unity and Gnome-Shell is that with the open source drivers, desktop usability, as in speed and responsiveness, is fine. With the proprietery drivers, things get noticably less smooth and laggy.



HOWEVER, the open source drivers whilst providing a smoother desktop experience, did not seem to be able to run HD videos as efficiently (nor any 3D games obviously) and ran both my machines easily 10-15c hotter :dis: Of course this in turn can give worse battery life, although using something like PowerPlay Switcher and turning on a power saving power_profile can help with that a fair bit. But the temperatures difference and the fact the machines are noticably louder as they try to cope is a fair turn off.



So this is a pretty small sample experience to go on, but it seems to me that new users will be better off in terms of desktop smoothness when using the often default "open-source" drivers but the machines might suffer heat and battery problems, which is not great but especially with ATI, the proprietery blobs can be less than ideal. I'm not too sure on how NVIDIA are, but I think Nouveau are meant to be quite decent, but I don't know how the power management is.



With my current netbook, as the heat and loudness of the fans annoyed me and I wanted to run HD videos smoothly, I decided to run with the proprietery Catalyst driver but use a very lightweight WM like Window Maker, where performance is so good it doesnt matter what driver I'm running :D and my HD videos and temps are fine.

My thinking is that a desktop computer might not be as noticable in terms of heat and the open source drivers are probably fine for general desktop use, but I don't have a lot of experience.



What do YOU think?




Issues connecting to smb NAS

Heyas



After i had refused to try further by experiments, how to connect to my iomega network storage, i browsed for a solution.

2 of those many pieces were:

http://dreambox.funfiles.cc/index.ph...&postID=146167

http://www.cyberciti.biz/tips/how-to...der-linux.html



Both of them refer to use a mount command similar to:


Code:


# mount -t smbfs -o username=usr,password=pw //ntserver/download /mnt/ntserver

However, i run this:


Code:


for NETFS in cifs nfs smb smbfs;do

    sudo mount -t $NETFS -o rw,soft,username=usr,password=pw  //192.168.10.110/Shares /mnt/nas && break || dmesg|tail

done

ping -c 1 192.168.10.110


And get:


Code:


mount: //192.168.10.110/Share is not a valid block device

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: wrong fs type, bad option, bad superblock on //192.168.10.110/Share,

      missing codepage or helper program, or other error

      (for several filesystems (e.g. nfs, cifs) you might

      need a /sbin/mount.<type> helper program)

      In some cases useful info is found in syslog - try

      dmesg | tail  or so



[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: unknown filesystem type 'smb'

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

mount: unknown filesystem type 'smbfs'

[ 1936.497282] CIFS VFS: cifs_mount failed w/return code = -115

[ 1995.374815] CIFS VFS: Error connecting to socket. Aborting operation

[ 1995.374964] CIFS VFS: cifs_mount failed w/return code = -115

[ 2155.242343] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3

[ 2155.338782] CIFS VFS: cifs_mount failed w/return code = -6

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

PING 192.168.10.110 (192.168.10.110) 56(84) bytes of data.

64 bytes from 192.168.10.110: icmp_req=1 ttl=64 time=1.18 ms



--- 192.168.10.110 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 1.182/1.182/1.182/0.000 ms


After the installation of:


Code:


sudo yum install cifs-utils, samba4, fuse-smb, cntlm

The errors look a bit better, but still not very promising for a new bee in networks...


Code:


mount: unknown filesystem type 'smbfs'

[ 2176.327538] CIFS VFS: cifs_mount failed w/return code = -6

[ 2218.861173] CIFS VFS: cifs_mount failed w/return code = -6

[ 2231.198923] CIFS VFS: cifs_mount failed w/return code = -6

[ 2340.291787] CIFS VFS: cifs_mount failed w/return code = -6

[ 2403.371196] CIFS VFS: cifs_mount failed w/return code = -6

[ 2526.971623] CIFS VFS: cifs_mount failed w/return code = -6

[ 2533.246870] CIFS VFS: cifs_mount failed w/return code = -6

[ 2545.667813] CIFS VFS: cifs_mount failed w/return code = -6

[ 2620.529803] CIFS VFS: cifs_mount failed w/return code = -6

[ 2620.590951] CIFS VFS: cifs_mount failed w/return code = -6


Any help or hint is very welcome.

Thanks in advance.




Installing F16 to SSD, (re)formatting parameter issues

Hi,



I'm having trouble to install F16 to an SSD. My main goal is to have the ext4 filesystem for the / partition to be created with some specific parameters that (should) help to align filesystem specific structures better to the erase block sizes of my SSD.



My first attempt was to partition the SSD myself and create an ext4 filesystem as intended for the / filesystem: (It's the -E parameter that's supposed to be important if /dev/sda2 is properly aligned in the partitioning too)



mkfs.ext4 -v -b 4096 -m 2 -E stride=128,stripe-width=128,resize=70G /dev/sda2



after doing this...



when I go through the livecd "installation to harddisk" procedure, I can not get F16 to install to this partition, it insists that it want to re-format the partition I chose (/dev/sda2) to use as /



When i give in and let the installation tool reformat (to ext4) the partition I can not find any option to add my (-E) parameters to the issued mkfs command that is run.



Is there a way to install to a preformatted filesystem, or a way to add parameters to the mkfs that is done from the installation tool GUI?




live Fedora should not automount

A live disc is good for diagnosis and repair. If a problem lurks in local media, I don't want them automounted. I want to mount only by choice. This is particularly important if my compuer is exposed to the Internet and a defect may cause that exposure. Not automounting is impossible to configure on a live disc before intermedia exposure has already occurred (except for networks). The Fedora 16 I downloaded for a live disc automounts, so I can't rely on it for technical problem-solving and so I'm looking for another distro for that purpose. Before I suggest reconfiguring future Fedora versions or producing an additional edition, would that be a bad idea?




Pinch Zoom

I'm running Fedora 16 Design Suite, and would like to have the pinch zoom and two finger rotate abilities that a lot of touchpads have. I used to have Windows 7 on this computer (Dell Inspiron N5010), and those functions worked, so I know the trackpad can read those functions. Does anyone know a way to enable features like that?




virtual box networking

i need to connect a windows XP as a guest(in virtual box) with fedora 16 as a host so that wired connection icon(in top bar)shows that connection is established.

how could i do this?

in windows xp the icon of network connection is lights up,whereas in fedora it did not!!!

in fact i want to establish such connection without any physicall connection,but in a virtual connection.




Pinch Zoom

I'm running Fedora 16 Design Suite, and would like to have the pinch zoom and two finger rotate abilities that a lot of touchpads have. I used to have Windows 7 on this computer (Dell Inspiron N5010), and those functions worked, so I know the trackpad can read those functions. Does anyone know a way to enable features like that?




live Fedora should not automount

A live disc is good for diagnosis and repair. If a problem lurks in local media, I don't want them automounted. I want to mount only by choice. This is particularly important if my compuer is exposed to the Internet and a defect may cause that exposure. Not automounting is impossible to configure on a live disc before intermedia exposure has already occurred (except for networks). The Fedora 16 I downloaded for a live disc automounts, so I can't rely on it for technical problem-solving and so I'm looking for another distro for that purpose. Before I suggest reconfiguring future Fedora versions or producing an additional edition, would that be a bad idea?




[SOLVED] Thumb drives and TRASH

I am having an odd issue with my thumb drives. I can add files to them, but cannot delete files from the thumb drives.



As a (non-administrator) user, when I select to delete a file on the thumb drive, it moves the file to a hidden trash folder (.Trash-1000) on the thumb drive. So the end result is the file disappears but still is occupying space on the thumb drive.



As root, I can delete the file (or directory), but then the thumb drives are endlessly busy and umount is not clean.



Anyone else seeing this odd behavior in F16 Xfce?




Game Maker

Hello. I would like to be able to make my own games in Fedora 16. I used GameMaker when I used Windows 7. Is there any similar program for Fedora 16?




Good newbie guide to Fedora firewall

Im trying to find some type of guide for making a simple good set of rules for a stand alone machine that is online with a reuter supplied by an isp provider??




Gnome Suspend on Lid Problems

I'm having suspend on lid close problems with my laptop. In KDE, it works great. In Gnome, I can suspend by clicking "suspend", but it does not suspend when I close the laptop's lid, even though it is set to in gnome-tweak-tool. Any suggestions?




Gnome Suspend on Lid Problems

I'm having suspend on lid close problems with my laptop. In KDE, it works great. In Gnome, I can suspend by clicking "suspend", but it does not suspend when I close the laptop's lid, even though it is set to in gnome-tweak-tool. Any suggestions?